As a photographer, it is natural to want to display your work for others to see.  Obviously, with social media, you can offer essentially the world (or, at least your followers), your latest efforts.  But what about your guests at home?  Printing and framing, are expensive and for me, impractical for the number of images I  would like to display throughout the year. 

Now you can certainly show work on a computer monitor, but this isn’t something that house guests think to seek out.  Coaxing someone to review your work on your computer always seem to me to be akin to breaking out the slide projector after dinner.  It makes most people cringe.

So I was on the website Luminous Landscape recently.  They posted a review, of two fairly novel products that looked really interesting to me, especially as I re-decorate, my home office workspace.  As it turns out, one can now purchase large digital display devices which are very appropriate for the wall display of photography.

Now digital picture frames have been around for a long time.  I have a 5 x 7 version sitting on the table in my den, which is pleasant for a slideshow of snapshots.  It is obviously too small and has insufficient resolution for serious work.  But there are apparently several manufacturers making display-worthy larger digital frames that offer a convenient and easy way to show one’s work (and other artistic works) in a gallery style.

The most aggressively marketed of these is the Meural.  This is a 27 inch, 1920 x 1080 resolution flat panel screen mounted to look like a matted framed object.  It is actually marketed along with a subscription service that allows you to display a huge variety of artworks licensed by the service.  It can be controlled from your computer or your mobile device.  It can also be loaded with your own images.  It has a unique motion sensor that allows you to swipe in front of the screen to change the artwork.

I, however, chose another product: the Memento Smart Frame.  It too looks like a matted frame, but for me, it has several advantages over the Meural product.  First, it has significantly higher resolution at 3240 x 2160 which also gives it a 3:2 aspect ratio rather than the 16:9 aspect ratio of the Meural.  It comes in two sizes: 25 and 35 inches, sold at US $599 and $899 respectively.

On both the Meural and the Memento products, it is possible to display other aspect ratios with the rest of the screen masked.  I find the images look much better if they can be displayed full screen.  Given this, most images work better at the 3:2 format (the native format of most sensors) than in the wider ratio.

The Memento Smart Frame is mounted to a wall using a specially designed bracket.  The 35-inch frame is capable of being mounted both horizontally and vertically.  I have the 25 inch which is only designed to be mounted horizontally. It is connected to an electrical outlet by a thin power wire which is relatively easy to hide.  You can also buy an optional flat power wire that can be taped to the wall and painted over.

The frame is activated by downloading an app to a mobile device, or your computer.  You can then connect the frame to your WiFi.  The app allows you to create different folders with images for display.  It will store up to 3000 images as jpgs.

You can decide to display 1 image or a variety of images which will display whatever time interval you select.  I will typically allow about 5 minutes between images so they can be appreciated, but a slideshow-like presentation would also be possible.

It also has the capability of having images uploaded remotely.  Thus it can be a sort of upscale version of those smaller digital frames marketed to seniors so their offspring can upload images of the grandchildren.

Another appreciated feature is the timer and light sensor which allows the frame to be off for prescheduled periods (like when I’m at work).  The frame can also be set to go off at night, and/or when there is no ambient light.  The frame also adjusts to the light level, and its color signature, contrast, and brightness can be adjusted in the app.

So how do images look?  From my point of view very nice indeed. I keep most of the controls near neutral, but it is important to adjust the brightness of the display so that the impression of backlighting is minimized. Once this is done, images are not immediately distinguishable from an actual framed print. Colors are vivid, and detail is excellent.  When displaying black-and-white in particular, the graduations are very pleasing, and blacks are deep.

I am so enjoying the Memento frame, I am thinking about buying a second one, perhaps a 35-inch version so that I can display vertically oriented images.  I also think of their other potential uses.

For instance, my last gallery show cost upwards of $2200 just for framing roughly 30 works.  In time when the price of these devices comes down a bit, I can imagine organizing a gallery show using four or five of these frames, each displaying perhaps 5 images sequentially.  Over the long run, this would save a lot of money and trouble (bubble wrapping and transporting framed prints is a nuisance). As opposed to the many hours it takes to create a standard display of prints, setting up this sort of show would be a breeze. I would only have to print the images I sell.

The Memento Smart Frame is a wonderful example of how technology is changing the nature of photography, and the display of artworks. And, it will only get better.

I am nothing if not a tightwad. I can’t help it.  Nonetheless, after approximately 20 years in digital imaging, I have finally broken down and acquired my first specifically-designed photo editing computer display.  This turns out to have been a really good idea, and one that was long overdue.

When I got started in computers back in the early 1990s, I bought what was for the time, a very nice computer desk, with a hutch and a matching printer stand.  It was quite modern and stylish for the times.  And just sufficient in size for a single CRT monitor.  I  have spent a lot of time at this desk.   More important yet, it was the place my two graduate computer engineer kids learned their craft. I think I developed a slight sentimental attachment.

Over the years I went through a variety of computer displays.  Cathode ray tubes, gave way  to flat panels, which were certainly more space efficient. When I became interested in digital photography, the display quality became more critical, and I would seek out IPS (in plane switching) panel displays of good quality. This technology allows one to view at wider viewing angles without a significant change in the appearance of colors.

Dedicated photography monitors, such as those made by companies such as Eizo, were just prohibitively expensive. Plus, my little desk from the 90s  limited my choices and prevented me from running dual monitors which would be very helpful both in photo editing, and for my work tasks.

My latest monitor was an 4/3 aspect ratio  NEC panel circa 2008 that  came highly recommended.  In the last several months, I noticed during calibration that it was  losing its luminance.  Given that pretty much all available monitors are now wide-screen format,  I was finally forced to bite the bullet and upgrade my situation.

Ultimately this led not only to new furniture, but to a significant redo of my home office/photo editing space.  I got rid of the old standby, and obtained  a large Hon desk for the work-space.  I painted the walls a more neutral gray, and changed the carpeting in attempt to match.  My desktop computer was already robust, so I merely needed a better display.  I looked at a variety of panels recommended by various websites, specifically  wide gamut panels that could display nearly 100% of the Adobe RGB color space.

For the uninitiated, there are multiple so-called “color spaces”.  These refer to the different “languages”, a digital device uses to interpret  color information.  Most monitors can display all or part of the more familier narrow “gamut” sRGB color space.  This is the “language” for instance, that your smartphone uses.

Photographers, particularly those that will print their work, will generally prefer to work in Adobe RGB, a broader color space.  Better digital cameras can generally be set to capture this more vibrant “dialect”.  Relatively few monitors however are capable of displaying this wider range of colors accurately.

There are some that do, most of which come in at a fairly high price point.  I ultimately chose the Ben Q  SW2700PT, a very well-reviewed full gamut display for roughly $550 (a comparable Eizo professional display costs $2900 US).  Despite its reasonable cost, it performs in a way comparable to higher price products.

The display comes very carefully packed with its stand. Included in the box is a monitor hood, the mark of a serious piece of kit designed for critical photo editing.  It includes a handy remote control with a sufficient cord either to sit on your desk or in its cubby, on the monitor stand.

It was easily assembled.  For the time being I am partnering it with my NEC monitor which is still functional, but no will no longer be used for any serious photography work.

Please bear with me on the technology, for I am hardly an expert.  For serious photographers  there are multiple advantages to this monitor compared to a more generic display.  First, as I understand it, each SW2700PT has its color profile carefully calibrated in the factory prior to its delivery.  The individual monitor’s profile is included in the box.

Monitors used for photography need frequent calibration to known standards, using specialized on-screen sensors, and software.  Once calibrated, the resultant “profile” is stored on the computer’s hard drive. This allows you to send files that will look the same on other calibrated devices (i.e. printers) 

The SW2700PT has sufficient memory that it can retain the color profile within its own hardware, rather than requiring it to be stored on the computer’s hard drive.  You can download  BenQ’s own calibration software from their website, which used with your own color calibrator, will store profiles that are directly accessible to the monitor’s remote control.  Using BenQ’s software makes re-calibrations much more straightforward then using aftermarket software which are generally designed to accommodate multiple types of displays.

If you have ever reviewed images on a dedicated professional photography or printing workstation, you know they tend to look dim. Most of the time we intuitively set our monitors to be brighter, and higher contrast, than actually is appropriate in a calibrated printing work flow.

Unfortunately, if you use your computer for both printing and casual use, you can end up viewing the online world in a less vibrant way.  I put up with this for years.  If I did brighten the screen, I had to remember to set it back to a more appropriate brightness/contrast levels prior to a print job.  This was generally a guess, and resulted in a lot of wasted paper and ink. Until things were dialed in, my prints generally came out too dark.

This is where the remote control comes in.  There are 4 buttons.  One is used to access the display’s menus. The others access three color profiles: sRGB, Adobe RGB, and monochrome.  More importantly, because everything resides within the monitor, you can also set a brightness/contrast setting for each.

Thus, for normal web viewing, I naturally use sRGB, which I have set for a pleasantly bright viewing screen and color reproduction that aligns with the web.  Switching to AdobeRGB dims things down to allow accurate photo editing and printing.  It is interesting to me that although AdobeRGB images reviewed in photo editing software look really nice, web content is overly saturated and unnatural.

The appearance of the monitor in Adobe RGB is striking, and for the first time I was able to see onscreen, the full spectrum of color, and nuance that  modern cameras imagers acquire.  It also has a fairly high resolution at 2560 x 1440 (not quite 4K) which allows you to view impressive amounts of detail.  This turns out to be not only important in photography (for accurate sharpening), but makes it much more pleasant to view text and waveforms, which is a part of my online medical work.

The monitor has a variety of other nice features including multiple inputs ( DVI-D, DisplayPort 1.2, HDMI and multiple USB ports). There is also an SD card reader.

I’ve been using the BenQ now for multiple months.  This is a situation of “I had no idea what I’ve been missing”.  As I scan between the new display and my old NEC monitor, there is no comparison in terms of color reproduction ( particularly in AdobeRGB), and resolution.

I note that there is a new version from BenQ, the PhotoVue SW271 featuring full 4K resolution for roughly $1100.  I’m sure that this would be a striking display, but for me at least, I’m not sure the improvement would justify doubling the cost.

If you’re serious about your photography, particularly if you are printing your work, this monitor is well worth a look.  If you’re coming from a more generic display, I think you will wonder how you did without it.

 

 

 

We never learn. 

Every year in the first weeks of April, I hear my warmth-loving friends lament  the  cool weather, and/or the lingering snow as though it were something unusual.  But this is April in the Pocono region.  Weather-wise, anything can, and does happen. It’s kinda like November, but in reverse. 

As I write this, It is April tenth.  The morning temperature is in the high twenties, headed for about 40 degrees later today. A half inch of snow has fallen overnight.

Now my childhood memories for this time of year tend to feature blissful afternoons after school. Dressed in shorts and a sweatshirt, it was warm enough to enjoy a pickup game of baseball (remember those) or to ride one’s bike.

The internet however, allows us to review historic weather data, readily available on multiple websites. Turns out this memory of mine is not really typical of early April in the Pocono region of Pennsylvania.  In fact I suspect that the warm afternoons I remember are representative of a fluke year, possibly 1967 ( I was 10) when April was rather warm. Most of the rest of my youth, the month was not so blissful.

It takes only a quick trip to the Weather Underground website to discover that at least in my part of Pennsylvania, April starts out with typical high temperatures in the low 50’s and by the 30^th of the month typically reaches the low 60’s.  Given this, there are opportunities for anything from bonnie summer-like days,  to significant snowfall events.  And oddly enough these weather swings tend to be fairly typical.

Oh, and by the way, May here is no picnic either.

For instance:  in our region, April 2017 was the warmest April on record.  The mean high temperature for the month was actually 66°, which is 3-4° higher than the average high temperatures for the very end of April.  And the month was warm pretty much from the first, to the 30^th with only a few cool spells.

Contrast that was 2016, which at least started out cool like this year prior to slowly warming as the month went on.

So April is the month, when I hedge my bets.  Once the snow melts, and the lawn firms up, spring cleanup is certainly reasonable.  Early-to-mid April  is however waaaay too early to take the plow off my UTV or put away the snow shovels.  This is true at least on the ridge-tops here, for as in the  fall, spring snowfall events  tend to be very altitude dependent.

I think back to April 16, 2007. It was a cold day in the Susquehanna river valley where I spend my workdays.  There was a wet snow falling, though it was unable to accumulate on the warm ground.  In late afternoon, I drove to my home (which is 13- 1400 feet higher in altitude than the hospital where I was working).

I noticed as I climbed out of the valley, that first the snow started to stick,, and then accumulate, deeper and deeper as I gained elevation.  At my home, there was 16 inches on the ground.  That was the most robust snowfall event of the season. It was also the greatest accumulation difference valley to mountains I can remember.  It is hardly the only significant snow event I remember occurring during the fourth month of the year.

So my approach with April is typically to stop complaining, and be grateful.  For even on the cooler days, it’s not as cold as it would’ve been in January when the sun arcs so much lower in the sky. When it’s warm, I bask in the sunshine and think back to that kid on his bicycle after school. 

I have faith that as the weeks pass, the warmth of spring will finally beat back the leftover chill of Winter.

Hopefully in June… towards the end of the month.

 

The winter of 2017-18 is over.  At least chronologically.

As I write this, it is the first full day of spring.  For the third time this March, a Nor’easter has formed off the coast of the Outer Banks and is making its way north.

It is now spreading snow over the Appalachians, and points east.  Forecasts for this storm have been wavering, but I think that between 2 and 6 inches over the elevation or I reside is likely (5″ eventually fell).  Though I do yearn for spring, the upcoming weekend is forecast to be sunny and pleasant.  It will likely offer one more opportunity for cross-country skiing before I put my equipment away.

It has been a strange winter.We had a little snow earlier in the year, and then extremely warm February.  By groundhog day it seemed likely that we would drift right into spring (though the groundhog disagreed).  Winter is cruel that way.

Then came March with its storms which in our part of the Poconos have maintained an adequate snowpack for recreation.  Today’s storm continues that trend.  And the warm weather, at least according to the meteorologists, is not yet in sight.

The last several months have been a busy time.  Given my position as a pulmonary physician, this winter’s flu epidemic kept me on my toes, running between patient rooms, gowning and re gowning to avoid the spread of the virus to other patients and hospital staff.  I have been overseeing some renovations at my home, including a new home office and photo studio.  Earlier in March, I spent my usual late winter week in the Adirondacks.  There was plenty of snow for skiing and snowshoeing as well as photography.   This will serve as my excuse for the lack of attention to the site over the past month or so.  Now happily, the flu epidemic has waned, and my renovations are largely done. It’s time to put pen to paper (so to speak).

In the time since my last article, mindful of my good experience with the rather modest XF 18–55mm zoom legacy lens, I focused my attention on its bigger brother, the XF55-200mm f3.5-4.8 OIS zoom that hearkens from the same time period.  I have written about this lens before.  Ironically, I published its original review almost exactly the same time of year back in 2014.   Now with the higher resolution sensors available on newer Fujifilm bodies, it was worth digging out of my roomy new equipment cabinet for a second look.

Over the years, this is proven to be a fairly rugged lens. Though I used it fairly frequently in its early years, cosmetically it looks roughly the same as when I took delivery.  At 55mm, and without its deep lens-shade, the lens is fairly compact, though it telescopes awkwardly as one increases the focal length.  It tends to look weird on a rangefinder style body such as the X Pro 2, though it handles just fine.

The focus and aperture dials remain smooth after 4 years of ownership.  The lens continues to exude high-quality.  Though it is not officially weather-sealed, I have used it multiple times in rainy or snowy conditions without any difficulty.

 

In my normal photography with the Fuji system, I tend to favor mild wide lenses like the 23 mm lens in my X100 series cameras, combined with a mild telephoto such as my XF 56mm f1.2.  With the 50-200mm I tended to shoot from its short end, out to about 160 mm, because as it approaches 200 mm, sharpness is known to deteriorate slightly.  It thus tends to be an outdoor lens, as it is not nearly fast enough, (nor razor sharp wide open like the Fuji primes ) for natural light indoor photography.

Particularly on a “long” lens. the addition of optical image stabilization (OIS) is extremely convenient. It definitely increases your “keepers” if your subject is static.

Now I love being a prime lens snob. To be honest, though, the quality of both of the original “kit” lenses is somewhere between more than adequate to awesome, Used within their limitations (good light, slowly moving subjects) they are no impediment to producing quality prints of landscape subjects. This suits me fine.  If I want to go back to shooting sports and fast-moving wildlife, I would probably invest in a use or refurbished Nikon D7XXX body to use with the  70-200 f2.8 VR Nikkor that still lurks in my studio.  For what I do, this Fuji telephoto zoom works just fine.

 

Fujifilm makes several other long zooms including a robust 50–140 millimeter f2.8 which would also suit my focal length needs, and allow more light for fast action and dusk/dawn shooting.  It is $1500 new and weighs more than twice as much as the 55-200, attributes that are not particularly interesting to me.  Like my Nikkor 70-200mm, it has sufficient size/weight to require a tripod mount. Thus, for me, it would be likely relegated to shooting from the car. That kind of shooting I tend to do with my heavier Nikon gear.

I still prefer prime lenses, both for their inherent quality and for the discipline they instill in my shooting.  But I can see maintaining a camera bag, with the 2 zoom lenses, and a more SLR-like camera such as an X-T10/20 body. This would be fairly light, and a very easy “grab” when headed out into the outdoors for some impromptu exercise. 

Given the quality of images I have seen these two lenses, such a gear bag would likely spend a lot of time by my side.

 

Your choice of camera often influences the way you use lenses; particularly in the Fujifilm camera universe.  Though the SLR-like bodies such as the XT-2, and XT-20 are very popular, I came into the X series by shooting their rangefinder styled products, and for the most part, continue to do so.

My main interchangeable lens body is an X Pro 2 (which I use along with my X100f). To me, going back to the M series Leica film cameras, rangefinder-type bodies like the X Pro 2 are shot with prime lenses which tend to perform better anyway. Thus my XF zooms have tended to languish at the back of the cabinet.

 Several weeks ago I was traveling to the Adirondacks, and selecting the photo gear that I would bring along.  Years ago I would pack 2 or 3 bodies (Fuji and Nikon), and several bags of lenses.  Maybe because I have been photographing there so long, and perhaps in my dotage, I’m getting a bit lazy. My tendency now is to streamline things a bit with perhaps 1 or 2 small camera bags.  Along with the X100, I will usually bring the X Pro 2 with several prime lenses, perhaps the 14 mm, the 56mm, and a 90 mm.  This works out fairly well given that the X100 has a fixed 23 mm lens.

 

One complaint I have about the XF lenses is that the lens pouches are virtually identical, without any exterior labels to indicate the lens within.  It’s thus easy to grab the wrong lens.  Rather than the 14 mm lens I was looking for, I found that I had pulled out the 18– 55-millimeter zoom which has similar bulk.  I hadn’t used the lens in some time so I thought: What the hell, let’s give it a try with the bigger sensor of the X Pro 2  and see how it holds up from an image quality standpoint.

In the “Dacks” I shot the lens and liked what I saw.  So I left it on the X Pro 2 for the next several weeks after returning home.

In photo workshops when I am teaching beginners, I’m a big proponent of prime lenses.  This is not only because their image quality tends to be superior (especially for the price).  I also think it’s important for people to understand and then characteristics of individual focal lengths to their photography

If they do utilize a zoom, I suggest that they avoid the habit of zooming to frame an image, and instead treat the lens like a collection of primes.  I have had to remind myself to do the same.  With the zoom mounted, I look at the scene and determine what focal length would be desirable in terms of foreground/background relationship and depth of field.  I then choose a focal length.  Putting my eye in the viewfinder.  I can then step backward or forward when possible to adjust the framing. That’s a lot easier than changing lenses constantly.

Another issue I have had with the X Pro 2 is camera shake.  Perhaps I have been spoiled by the very soft leaf shutter of the X100 series.  I find that I get a fair number of images with the X Pro 2 and it’s more robust shutter action, where there has been movement artifact.  The image stabilization in the little 18-55mm is a big help with this, noticeably reducing the problem.

 

I have forgotten how nice the image quality is.  Used as I am to some of the high-quality lenses in the Fujinon line, I am delighted with the look of images shot with this modest lens.  It’s got good contrast and handles the 24-megapixel sensor of the newer cameras with ease.  It’s capable of obtaining lovely detailed 3-dimensional images, although at the 18 mm end, it  is slightly soft until it’s stopped down.  And like all of the XF lenses it has a solid feel and lovely built quality.

In the weeks since returning home, we’ve seen a variety of weather here in Northeastern Pennsylvania, including bitter cold,  then a sudden thaw that led to severe ice damming and flooding on the Susquehanna River in the Wyoming Valley.  The residual of this has been bank ice of a size and volume I’ve never seen before.

Now, in the mountains, a  winter snowpack is finally building, which for us more and more, seems to be a February/March event.

There was even some snow at Nescopeck State Park for their Winterfest event, something we haven’t seen in some time.  It was fun to see the sled dogs finally get to pull their sled.

I’m aware that there are better short zooms in the XF series lineup, including the 16-55mm f2.8, which is said to be very sharp indeed.  Unfortunately is quite a bit larger and heavier (though it is weather resistant) and has no optical stabilization.  And at $1100, it’s significantly more expensive than the $700 18-55.  And there isn’t an image I have shot over the last several weeks that makes me pine for a more exotic lens.  If I need more sharpness, I will go back to the primes.

I forgot how much I like this little lens.  Like the 60 mm f2.4 I wrote about here, I’m moving it to the front of the cabinet.

It has been cold in Northeastern Pennsylvania. For us at least, it is very cold.  With high temperatures in the single digits and lows well below zero, this is a stretch of weather quite the opposite of the warm January’s we had over the last 2 years. 

Up on the Pocono Plateau, we have a few inches of light powdery snow, sadly inadequate for cross-country skiing.  Still, in all it’s pretty, and with the cold temperatures, the ice formations in our creeks and streams get rather interesting and complex.  With a snow cover, the scenery is interesting again, and at this depth, it is no impediment to hiking and exploring.

With this frigid weather has come wind, which makes outdoor activities more challenging.  Anticipating a trip coming up to the even colder Adirondacks, I’m spending time out in the elements to acclimate myself to cold weather sports.  As I get older, this gets more and more difficult.

The forests change in the bitter cold.  A walk in the woods during single-digit temperatures is a quiet one; with little evidence of the chickadees, nuthatches, blue jays, and squirrels one encounters in more normal temperatures.  The squirrels I understand, are probably holed up in their leafy nests, but the location and condition of the birds is more mysterious.  Due to they find shelter?  Are they in torpor?

This cold has real consequences for people.   My neighbors live in an even larger Victorian summer home that I do, albeit one that is not as obsessively sealed and insulated as my own.  On such cold days, even with the use of auxiliary coal and wood stoves, they struggle to keep the house in the low 60s.

Even though we live in a natural gas producing region, I’m told that with such high demand, the gas suppliers are forced to ration supplies, diverting them from businesses, to homeowners.  This can obviously be quite disruptive. It’s slightly embarrassing to me, that in these times the schools actually stay closed on the coldest days for fear of exposing the little darlings to the winter’s chill.  Whatever happened to “bundling up”?

A friend of mine who runs a heating oil distributor once told me that surprisingly, he actually hates bitter cold times because people who live on the edge financially, run out of money to buy heating oil. This leaves him with a difficult choice: to either extend credit or refuse a delivery.  More often he chooses the former than the latter putting him at financial risk.  These conditions also challenge his service people, who work long hours, doing emergency repairs on poorly maintained heating systems.

 

Still, in all, this will pass.  Our normal winters have highs in the 30s and lows in the teens, a temperature.  regimen to which we are all more accustomed.  People will still grumble, complain, and pine for spring, while we skiers wait for the Northeaster’s of the later winter to kick start our outdoor winter sports.

Soon the snows will come.

Every once in a while, perhaps while out shopping, or at a restaurant, I will encounter an old friend, whose life path has drifted out of my particular orbit. After spending some time catching up, I will be reminded of how much I enjoy their company, and will wonder why we didn’t make more of an effort to keep in touch.

In the last several weeks, I feel it had that sort of an experience with a lens. In particular, the Fujinon XF 60 mm f2.4.

This was one of the 3 original prime lenses introduced with the X Pro 1 in 2012. At the time, it was lauded by some is the sharpest of the trio (the 18 mm f 2.8, the 35mm F1.4, were the other 2 lenses).

I remember my initial impressions were that this was a bitingly sharp lens, noticeably more so than my Nikon primes. In fact, the quality of all of these original lenses probably helped pull me from using my Nikon gear, to shooting mainly with Fuji.

But just like with life, newer things come along, in this case, lenses that are faster and newer, and distract me from an old companion. After a time the 60 mm became lost in the back of my photography cabinet.

Several weeks ago while on my way out the door to go hiking, I picked up camera bag with my XT-10 body, which I noticed had no lens mounted on it. I opened a cabinet and on a whim, reached blindly to the back of the shelf, determined to utilize the first Fujifilm lens I grabbed. This turned out to be the 60 mm, which I have basically ignored for many years. I mounted it on the camera and have been shooting ever since.

To remind you, this is a macro lens, the first in the Fujifilm “XF” line. It is fairly diminutive, compared to for instance the 56 mm f.12. It’s nicely built, with not only a fairly deeply recessed small front element but then a rather large metal lens hood. All of this makes it quite resistant to lens flare as the sun’s rays rarely reach the front element.

Though the lens aperture is tighter than many of the other Fujifilm primes, the lens is quite sharp wide open at F2.4. For those of us that focus on landscape imaging, the modest deficit in light gathering is really not much of an impediment when shooting in the daylight hours. This plus its small size may make it preferable to the newer 56mm for shooting while hiking. If only it had stabilization…

On an APS sensor, the lens has a 90 mm equivalent field of view, which makes it ideal for the sort of late summer early fall photography, available now as it allows you to isolate the sporadic displays of autumnal color beginning to erupt at this time of year. It’s also wonderful to have its macro capabilities for close-ups of wildflowers and the other fall forest offerings.

And boy is it sharp! From f2.8 and above, the lens has incredible definition. Out of focus elements look lovely at f2.4-3.5. Mounted on the XT-10 it balances very nicely, though it is a bit long with the lens hood installed. Still an all, it’s very compact package.

One downside of this optic for outdoor use is that given its magnification, it is prone to artifacts from camera shake. I find that using my steel Gitzo monopod, and good shooting technique, I can get acceptably sharp results without a tripod. You just have to be careful.

I did a search on eBay and found there are a lot of these lenses for sale. I suspect that it is a common lens for Fujifilm users to unload. There is a wide range of price’s but it looks like you could acquire a nice used one for between $US200- $400. There is also a broad range of prices for new lenses of between $US300-$650.

Given my experience, I think I’m going to put this lens back into circulation for outdoor shooting, relying more on the 56 mm f1.2 for street, and indoor work.

If you have one in the back of your cabinet, pull it out. I suspect he will find it is indeed like an old friend.

 

 

 

 

In the highlands of Northeastern Pennsylvania, meteorological summer has passed by, without stopping to say hello, or even waving as it drove past.

I can’t say there was no hot weather, but for the first time in many years, I don’t remember any even slightly uncomfortable nights sleeping in my non– air-conditioned bedroom (most summers we have a week or so of nighttime temperatures in the mid-70s).

I suspect that my friends with boats and/or swimming pools were disappointed. I, however, loved the pleasantly warm days, and crisp nights. So the climate trend that I described in June, which helped to abort a gypsy moth infestation, continued for the next 2 months.

For a variety of reasons, I have not had a great deal of photographic output over the summer. I think that the summer season often distracts me from photography with a number of different diversions, and discourages me from photography in a number of ways. From the biting insects that plague me when I try to I set up my tripod, to the monotonous green landscapes, and the sunrises that are inconveniently early, I tend to lose some enthusiasm over the warmer months.

Usually, my interest in a new piece of gear stimulates me to get out and shoot, but at this point, I’m extremely content with the gear that I have. This is particularly true of the X100F, and the X Pro 2. I really don’t crave the next upgrade in focusing or sensor resolution.

I read with interest the introduction of the Nikon’s new flagship DSLR, the D850.  I should really be lusting after this camera, with its state-of-the-art backlit 47mp sensor, its 9 frames per second speed, but I’m not.  Two generations old now, my 36mp D800E still looks new, works beautifully, and produces gorgeous files that look great in as large a print size as I am likely to create.

Maybe I’ll buy a refurbed one in a couple of years.

  Also though, I can’t escape the feeling that big bulky DSLRs are like dinosaurs at the end of the Cretaceous; about to be overwhelmed by the smaller, more convenient and increasingly capable mirrorless cameras which are becoming a more dominant force in the market.

Meanwhile, things photographically are looking up.

 Here in the Poconos, the leaves are beginning to change color, and the sound of katydids punctuates the crisp night air. The big cinnamon ferns in the forest are beginning to change to a sort of golden brown, while the deer transform from the red coat of summer to their cold weather coat of gray. Sadly, the humming birds have disappeared south.

For my wife and I, there will be an upcoming trip to the Adirondacks, to enjoy Oktoberfest, and “peak leaves”.

There is also the fresh introduction of the Fujifilm XE-3. Hmmm.

There should be plenty to write about, and photographic in the upcoming months.

Stay tuned.

 

 

It has been a quiet summer here on the Pocono Plateau. The weather has been quite pleasant since mid June, though in the last week or so we’ve had several runs of severe afternoon thunderstorms that resulted in power outages  in our small community.  Otherwise the weather has been lovely.

I have noticed that my postings tend to fall off during the summer months. I think part of this is due to a certain contentment I feel with the onset of the season .

We had the usual march of summer flowers including honeysuckle, black-eyed susan’s, mountain laurel, foxglove and finally rhododendron.  Now the first cardinal flowers have appeared alongside stream beds.  I noticed yesterday that goldenrod is beginning to bloom.

In our neighborhood we had an abortive gypsy moth outbreak, but a fortuitous run of cool wet weather in early June encouraged several pathogens, which wiped out the caterpillars before they could do much damage. This undoubtedly saved several old Chestnut oak trees on my property who are already relatively marginal.

We have had the usual run of community events, including our Fourth of July celebration, summer cocktail parties, and the very pleasant wedding of the friend’s daughter that I help to photograph. I am really enjoying the combination of the X 100f, and the X Pro 2/56mmf1.2 for events like this.

The house is empty this summer. My daughter of course lives in Seattle, and my son, who is a graduate student, is doing an Google internship in that city. It is nice that they can be together.  We did meet up with them in State College, when they flew into attend a wedding.

Equipment wise, I have acquired a DJI Mavic Pro drone, and have been trying to master shooting smooth aerial video. Once I have something to show for it, I will share my experiences on these pages. It turns out there is definitely a learning curve to this.

Mostly though, I am enjoying the summer season. I am looking forward to some events with the potential to provide some content for these pages as the summer goes on.

So bear with me.  I’ll be back.

 

It has been almost 4 months since the UPS man walked up my driveway, and dropped off my X100f.  It has become, as was its predecessor the X100t, my most used camera body.  And over that period of time, I have definitely formed some opinions on the camera particularly compared to its predecessors.

I posted my initial review of the X100f here.

The “f” model  X100 some ways is the most revolutionary new model, at least since the “s” version of this small range finder-like body.  It slightly larger than its predecessors, mainly to accommodate the larger battery of the other cameras in the “X” series.  I was concerned that this would alter the physical joint using the camera, but over the months the differences mean nothing.  And the convenience of packing one battery type for a photography job or trip is well worth whatever additional girth the camera brings.  I also like the idea that in a pinch, the camera can serve as a charger for the pool of batteries either in a car or at home.

I have been using the camera a lot with the TCL  X100 Mark II, which automatically changes the camera setting to reflect the change in the field of view (35–50 millimeters).  This lens, like its predecessor, is optically excellent, and now I don’t forget to change the camera setting.

I’m pleased with the autofocus performance in general, but I am sometimes frustrated by the facial recognition, which is somewhat inconsistent even shooting multiple images of the same scene.  Sometimes it just won’t pick up the face.  It would probably be better, to turn it off and just use a focus point.  This is especially true since we now have the advantage of the joystick control.

I’ve noticed a few other things.  The focus mode switch on the side of the camera seems to have had its actions stiff and somewhat.  On the camera’s predecessor, I actually had some gaffer tape over the switch to keep it in the “S” setting as I often found that it would move unbeknownst to me (I generally only use manual focusing for panoramas, and almost never use continuous focusing).

I have never been overly impressed in the past with the resolution improvement of the new 25mp sensor relative to its 16mp predecessor, but I think I’m noticing more shake artifact in images with the newer camera.  Maybe as I age my hands aren’t as steady as they used to be.  Still, in all, I don’t remember this with the previous bodies.  Nothing in the leaf shutter mechanism is changed to my knowledge, and the camera still has a nice soft shutter sound.

I was already a fan of the Acros black-and-white film simulation on my X Pro 2, and though I shoot in raw, I often develop images in photoshop with this profile.  To my eyes, it is relatively close to the camera-generated image.

Overall I’m extremely pleased with my new camera.  The X100 series has become like an old friend to me, and in my collection, even among the other Fujifilm products, it is the easiest to reach for what I’m going out and about.  It remains discrete and non-threatening and wonderful for event and street shooting, and with the extra resolution wonderful for landscapes.  Also with its soft shutter and built-in neutral density filter, it remains my favorite camera for moving water.

It’s,  going to get a lot of use over the next several years.

.